Although many people consider car washing and car detailing as the same thing, this is not the case. Detailed car washing Is a time-consuming process and goes beyond regular car wash to make the vehicle look perfectly clean from inside and outside. Although both methods involve cleaning the car but car detailing is deeper and more complicated than a simple car wash. Exterior and interior car detailing refers to a whole process that includes washing exterior and interior parts, vacuuming, waxing, polishing and removing any scratch, and reconditioning the car. Here is a complete process of exterior and interior car detailing
Interior Car Detailing
Interior car detailing requires more effort than exterior detailing. The interior detailing process involves cleaning the inner parts. The components present in an interior cabin, including leather, plastics, natural fibers, vinyl, are cleaned. For the cleaning of the interior cabinet, techniques like steam-cleaning and vacuuming, are used.
Dirty air exhaust spreads allergens, stains and shingles cause switches to fail, and hazy windows can obscure the driver’s view. There are many ways interior car detailing can be performed, including
The first procedure in cleaning the car’s interior area includes vacuuming of seats, rear cargo area, shelf, headliners, and trunk. Other parts of the car, including floor mats, are also cleaned, and for the problematic areas where the vacuum cannot be reached, an air compressor is used.
Brushing and Steam Cleaning
The purpose of brushing and steam cleaning is the cleaning of mats and carpets. Scrubbing is done to remove tinges and blemishes from the mat. A steam cleaner can also be used to work more efficiently and effectively. However, after cleaning the carpets and rugs, they should be left to dry thoroughly to avoid mold.
Leather cleaner, leather soap, and saddle soap are used to clean all parts of the leather. The soapy areas are cleaned with the help of a damp cloth. Leather can be dry for which cleanser is used to make cleaning more effective.
Glass cleaner works amazingly for glass cleaning; it ensures that glass remains sparkling and assures that driver’s view is not obstructed.
Re-vacuuming and Wiping
Re-vacuuming is done soon after vacuuming so that if there is any dirt left in the interior cabin, it may get removed. The windows and dashboard should be cleaned with a clean cloth using a detergent. This process helps to restore the original shine of the vehicle.
A car is delivered with a pleasing scent; a deodorant is used in the car.
Exterior detailing is also not as simple as washing. It involves cleaning car gleam, minimizing surface stretching, washing the tires, polishing, and applying shealing pain. The process includes
Washing Wheels and Tires
Tires and wheels should be cleaned first to avoid any kind of dirt from being transferred later. Cleaning of tire is preferred before any other step because undried water can result in scraping of paint, and it is also possible that dust and overspray will cling to the clean paint. Work should be done on one tire at a time, use good quality cleaners to clean the tires, and soft brushes should be used to clean dirt, grease, and other particles.
Cleaning Outer Area
Clean from top to bottom as water dripping from the top can make the work lengthy. High-quality soaps, shampoos, and micro towels should be used for cleaning purposes. Before washing the exterior area, prepare everything in an organized manner so that you may not have to work again and again in the same areas.
After washing the exterior of the car, let it dry. Good quality microfiber towels are known for absorbing a lot of water; they can be used to dry the car. These towels also protect the paint from any damage. The drops of water can result in scraping of pain if left for sundry. Therefore, do not leave the car on sundry.
Clay the Car
After cleaning the car, the next process is to clay the car using a clay bar. The purpose of the clay bar is to remove all the microscopic contaminants that don’t leave the car’s surface with washing.
Plenty is car bar lubricant is required for cleaning. The clay bar is also used on windows and windshields. After applying the lubricant, it is then wiped out with the help of good quality microfiber towel.
Polishing is required in case there are scratched and swirls in the car. Various kinds of polishers are available in the market that can be used depending upon the abrasiveness. More abrasive polishing works better in removing the scratches and swirls from the car’s surface.
The purpose of wax or paint is to give a beautiful shine to the surface of the car. Natural or synthetic wax is applied to the car depending upon the demand. Wax protects the car from harsh substances and keeps it lustrous and shiny for a long time.
Tire shine is applied after the drying of the car. It helps to prevent the accumulation of brake dust on tires. Make sure that car is derived after the complete drying of the shine.
Other exterior services that can be performed on the car include trim repainting, engine detailing, engine pressure cleaning, bumper repair, headlight polishing, glass chip repair, and paint touch-up.
Car wash and detail should involve analyzing all types of paint, current damages, peels, cracks, exterior and interior conditions, oxidation effects, and damage from acid.
A car looks more attractive after detailing; it adds value to the car. Different car detailing packages are offered at different prices. The higher the quality of services, the higher will be the cost.
You can detail the car yourself and use materials carefully to use them a couple of times. Follow the instruction while detailing the car like some detergents require more water to dilute them, while some can be applied as it is. Therefore, read the instructions carefully and make sure that you do not use expired materials because they will affect the paint and other car accessories. You can buy good quality cheap car detailing products by extensive research.